Axis Q8752-E Mk II - Select Scene Profile; Reduce Image Processing Time with Low Latency Mode; Select Exposure Mode

10
2. Adjust the focus.
3. Click the focus recall button.
Delete a focus recall area
1. Pan, tilt, and zoom into the focus recall area you want to delete.
The focus recall button toggles to minus when the camera detects a focus recall area: .
2. Click the focus recall button.
Select scene profile
A scene profile is a set of predefined image appearance settings including color level, brightness, sharpness,
contrast and local contrast. Scene profiles are preconfigured in the product for quick setup to a specific
scenario, for example Forensic which is optimized for surveillance conditions. For a description of each available
setting, see .
You can select a scene profile during the initial setup of the camera. You can also select or change scene profile
later.
1. Go to Video > Image > Appearance.
2. Go to Scene profile and select a profile.
Reduce image processing time with low latency mode
You can optimize the image processing time of your live stream by turning on low latency mode. The latency in
your live stream is reduced to a minimum. When you use low latency mode, the image quality is lower than
usual.
1. Go to System > Plain config.
2. Select ImageSource from the drop-down list.
3. Go to ImageSource/I0/Sensor > Low latency mode and select On.
4. Click Save.
Select exposure mode
Note
Exposure modes are only available for the visual channel.
To improve image quality for specific surveillance scenes, use exposure modes. Exposure modes lets you control
aperture, shutter speed, and gain. Go to Video > Image > Exposure and select between the following exposure
modes:
• For most use cases, select Automatic exposure.
• For fast moving objects that require a fast or fixed shutter, select Automatic aperture.
• To maintain a longer depth of field or focus range, select Automatic shutter.
• For environments with certain artificial lighting, for example fluorescent lighting, select Flicker-free.
Select the same frequency as the power line frequency.
• For environments with certain artificial light and bright light, for example outdoors with fluorescent
lighting at night and sun during daytime, select Flicker-reduced.
Select the same frequency as the power line frequency.
• If you need full control of all parameters, select Manual. This is mostly useful for scenes with little
change in lighting.
• To lock the current exposure settings, select Hold current.
AXIS Q8752-E Mk II Bispectral PTZ Network Camera