Axis Q8752-E Mk II - Video

20
Shows what kind of access to the device that is active, what encryption protocols are in use, and if unsigned
apps are allowed. Recommendations to the settings are based on the AXIS OS Hardening Guide.
Hardening guide: Link to AXIS OS Hardening guide where you can learn more about cybersecurity on Axis
devices and best practices.
PTZ
Shows the PTZ status and the time of the last test.
Test: Start a test of the PTZ mechanics. During the test, there are no video streams available. When the test is
finished, the device restores to its home position.
Connected clients
Shows the number of connections and connected clients.
View details: View and update the list of connected clients. The list shows IP address, protocol, port, state,
and PID/process of each connection.
Ongoing recordings
Shows ongoing recordings and their designated storage space.
Recordings: View ongoing and filtered recordings and their source. For more information, see
Shows the storage space where the recording is saved.
Video
Click-and-drag to pan and tilt in the live view.
Zoom Use the slider to zoom in and out.
Focus Use this setting to set focus in the shown area. Depending on the device, different focus modes are
available.
• Auto: The camera automatically adjusts focus based on the entire image.
• Manual: Set the focus manually at a fixed distance.
• Area: The camera automatically adjusts focus for a selected area of the image.
• Spot: The camera automatically adjusts focus for the center of the image.
Brightness Use this setting to adjust the light intensity in the image, for example, to make objects easier to
see. Brightness is applied after image capture, and does not affect the information in the image. To get more
details in a dark area, it is sometimes better to try to increase gain or increase exposure time.
AXIS Q8752-E Mk II Bispectral PTZ Network Camera