EasyManua.ls Logo

Axis Q8752-E Mk II - SD Card Slot; Insert an SD Card

Axis Q8752-E Mk II
98 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
81
SD card slot
CAUTION
Moving parts. Risk of injury. Keep your body parts away from the product when it’s in operation.
Disconnect from power supply before installing or performing maintenance on the product.
CAUTION
Hot surface. Risk of injury. Don’t touch the product when it’s in operation. Disconnect from power
supply and allow the surfaces to cool before performing maintenance on the product.
NOTICE
Risk of damage to SD card. Don’t use sharp tools, metal objects, or excessive force when inserting or
removing the SD card. Use your fingers to insert and remove the card.
Risk of data loss and corrupted recordings. Unmount the SD card from the device’s web interface before
removing it. Don’t remove the SD card while the product is running.
This device supports SD/SDHC/SDXC cards.
This device supports microSD/microSDHC/microSDXC cards.
This device supports microSD/microSDHC/microSDXC cards (not included). For information about limitations and
updates, see the device’s release notes.
For SD card recommendations, see axis.com.
For SD card recommendations, see axiscompanion.com.
SD, SDHC, and SDXC Logos are trademarks of SD-3C LLC. SD, SDHC and SDXC are trademarks or
registered trademarks of SD-3C, LLC in the United States, other countries or both.
microSD, microSDHC, and microSDXC Logos are trademarks of SD-3C LLC. microSD, microSDHC,
microSDXC are trademarks or registered trademarks of SD-3C, LLC in the United States, other countries or both.
Insert an SD card
You can use an SD card to store recordings locally in the device. The SD card is not included.
CAUTION
Risk of injury. Moving parts. Keep your body parts away from the device when in operation.
Disconnect from power supply before installing or performing maintenance on the device.
Risk of injury. Hot surface. Do not touch the device when in operation. Disconnect from power
supply and allow the surfaces to cool before performing maintenance on the device.
NOTICE
When you remove the top cover you expose parts of the camera that are sensitive to impact. Make sure you
don’t hit the unprotected camera with the top cover when you remove it.
To insert an SD card in the device:
1. Disconnect power from the device.
AXIS Q8752-E Mk II Bispectral PTZ Network Camera

Table of Contents

Related product manuals