Axis Q8752-E Mk II - Stream; Audio Enhancement; Recordings

42
Allow stream extraction : Turn on to allow stream extraction.
Input type: Select the type of input, for instance, if it’s a microphone or line.
Power type: Select power type for your input.
Apply changes: Apply your selection.
Echo cancellation : Turn on to remove echoes during two-way communication.
Separate gain controls : Turn on to adjust the gain separately for the different input types.
Automatic gain control : Turn on to dynamically adapt the gain to changes in the sound.
Gain: Use the slider to change the gain. Click the microphone icon to mute or unmute.
Stream
Encoding: Select the encoding to use for the input source streaming. You can only choose encoding if audio
input is turned on. If audio input is turned off, click Enable audio input to turn it on.
Audio enhancement
Input
Ten Band Graphic Audio Equalizer: Turn on to adjust the level of different frequency bands within an audio
signal. This feature is for advanced users with audio configuration experience.
Talkback range : Choose the operational range to gather audio content. An increase to the operational
range cause a reduction of simultaneous two-way communication capabilities.
Voice enhancement : Turn on to enhance the voice content in relation to other sounds.
Recordings
Ongoing recordings: Show all ongoing recordings on the device.
Start a recording on the device.
Choose which storage device to save to.
Stop a recording on the device.
Triggered recordings will end when manually stopped or when the device is shut down.
Continuous recordings will continue until manually stopped. Even if the device is shut down, the recording
will continue when the device starts up again.
AXIS Q8752-E Mk II Bispectral PTZ Network Camera