Axis Q8752-E Mk II - Limits

39
Limits
To narrow down the area under surveillance, you can limit the PTZ movements.
Save as Pan 0: Click to set the current position as zero-point for pan coordinates.
Pan-tilt limits: The camera uses the coordinates of the center of the image when you set pan-tilt limits.
• Left pan limit: Click to limit the camera’s pan movements to the left. Click again to remove the
limit.
• Right pan limit: Click to limit the camera’s pan movements to the right. Click again to remove
the limit.
• Top tilt limit: Click to limit the camera’s tilt movements to the top. Click again to remove the
limit.
• Bottom tilt limit: Click to limit the camera’s tilt movements to the bottom. Click again to remove
the limit.
Auto-flip : Enables the camera head to instantly reverse 360° and continue to pan beyond its
mechanical limit.
E-flip : Automatically corrects the camera view by flipping the image 180° when the camera tilts
beyond -90°.
Nadir-flip : Enables the camera to pan 180° when tilting beyond -90°, and then continue upwards.
Zoom limit: Select a value to limit the camera’s maximum zoom level. Optical or digital (e.g. 480x D) values
can be selected. When using a joystick, only digital zoom levels can be used to set the zoom limit.
Near focus limit: Select a value to prevent the camera from autofocusing on objects close to the camera. This
way, the camera can ignore objects such as overhead wires, streetlights, or other nearby objects. To make the
camera focus on the areas of interest, set the near focus limit to a value greater than the distance at which
the objects of no interest tend to appear.
AXIS Q8752-E Mk II Bispectral PTZ Network Camera