Axis Q8752-E Mk II - Orientation Aid; Gatekeeper; Control Queue; Audio

41
Orientation aid
Orientation aid: Turn on to activate overlays of user-defined points of interest at the correct bearing and a
2D-compass synchronized to the cameras movements, including a field of view.
Direction
• Set north: Position the camera at north, and click Set north.
Preset positions: Select the preset positions used for orientation aid.
• To select an individual preset position, click the preset position.
• To select all preset positions, click .
Gatekeeper
A gatekeeper monitors an area such as an entrance gate. When motion is detected in the monitored area, the
gatekeeper steers the camera to a selected preset position. Using a zoomed-in preset position can make it
possible to, for example, read a license plate or identify a person. When motion is no longer detected, the
camera returns to its home position after a defined time.
Control queue
User control queue
• PTZ control queue: Turn on to place PTZ control requests in a queue. This displays the users status and
position in the queue. To use the PTZ controls in AXIS Camera Station, turn off this setting.
– Enter queue: Click to add your request for PTZ control to the queue.
– Release control: Click to release the PTZ control.
• The user groups are listed in a prioritized order with the highest priority on top. To change the priority
of a user group, click and drag the user group up or down.
For each user group:
– Timeout duration: Set the amount of time to wait before timeout. The default value is 1 minute,
and allowed values are from 1 second to 60 minutes.
– Timeout type
– Timespan: Time out after reaching the set duration.
– Activity: Time out after reaching the set duration since the last activity.
– Infinity: Never to time out until a user with higher priority takes control.
Settings
• Limit number of users in queue: Set the maximum number of users allowed in a queue. The default
number is 20, and allowed values are 1–100.
• Control queue poll time: Set how often to poll the camera to update the place of the users or user
groups in the queue. The default value is 20 seconds, and allowed values are from 5 seconds to 60
minutes.
Audio
Device settings
Input: Turn on or off audio input. Shows the type of input.
AXIS Q8752-E Mk II Bispectral PTZ Network Camera