14
Add street names and compass direction to the image
Note
The preset positions and compass direction will be visible in the compass field in all video streams and
recordings.
To activate the compass:
1. Go to PTZ > Orientation aid.
2. Turn on Orientation aid.
3. Position the camera view at north with the crosshair. Click Set north.
To add a preset position to show in the compass field:
1. Go to PTZ > Preset positions.
2. Use the crosshair to position the view where you want to add a preset position.
3. Click Add preset position to create a new preset position.
Adjust the camera view (PTZ)
Limit the pan, tilt, and zoom movements Limit the zoom movements
If there are parts of the scene that you don’t want the camera to reach, you can limit the pan, tilt, and zoom
movements. For example, you want to protect the privacy of residents in an apartment building, which is located
close to a parking lot that you intend to monitor.
To limit the movements:
If there are parts of the scene that you don’t want the camera to be able to zoom in on, you can limit the
maximum zoom level. For example, you want to protect the privacy of residents in an apartment building, which
is located close to a parking lot that you intend to monitor.
To limit the maximum zoom level:
1. Go to PTZ > Limits.
2. Set the limits as needed.
Create a guard tour with preset positions
A guard tour displays the video stream from different preset positions either in a predetermined or random
order, and for configurable periods of time.
1. Go to PTZ > Guard tours.
2. Click Guard tour.
3. Select Preset position and click Create.
4. Under General settings:
– Enter a name for the guard tour and specify the pause length between each tour.
– If you want the guard tour to go to the preset positions in a random order, turn on Play guard tour in
random order.
5. Under Step settings:
– Set the duration for the preset.
– Set the move speed, which controls how fast to move to the next preset.
6. Go to Preset positions.
1. Select the preset positions that you want in your guard tour.
2. Drag them to the View order area, and click Done.
AXIS Q8752-E Mk II Bispectral PTZ Network Camera
To Next Page
Loading...
