37
Preset positions
• Create preset position: Create a new preset position based on the current position of your
camera.
– Thumbnail: Turn on to add a thumbnail image for the preset position.
– Name: Enter a name for the preset position.
– Home position: Turn on to set this position as your camera’s default field of view. The home
position is marked with . Your camera will always have a home position.
Settings
• Return to home position when inactive: Turn on to make the camera return to its home position after
a specified period of inactivity.
• Use thumbnails: Turn on to automatically add a thumbnail to any new preset position you create.
The context menu contains:
• Create thumbnails : Create a thumbnail for all your preset positions.
• Refresh thumbnails: Replace the thumbnails for your preset positions with new and updated
thumbnails.
• Delete all preset positions: Remove all your preset positions. This will also create a new home
position automatically.
Guard tours
Guard tour: Create a guard tour.
• Preset position: Select to create a guard tour with preset positions.
• Recorded: Select to create a recorded guard tour.
Preset position
A guard tour with preset positions continuously streams footage from a selection of preset positions in a
random or fixed sequence. You can choose how long the camera should stay at each preset position before
moving on to the next. The guard tour will continue to run in an endless loop until you stop it, even when there
are no clients (web browsers) streaming the footage.
AXIS Q8752-E Mk II Bispectral PTZ Network Camera
To Next Page
Loading...
