Axis Q8752-E Mk II - Clean Your Device

90
Clean your device
You can clean your device with lukewarm water.
You can clean your device with lukewarm water and mild, nonabrasive soap.
You can clean your device with lukewarm water and detergents that contain any of the following chemicals:
• isopropanol 70% (IPA)
• hydrogen peroxide 3% (H
2
O
2
)
• sodium hypochlorite <5% (NaCIO)
You can clean your device with high-pressure water and detergent.
CAUTION
Before you use a detergent, read and adhere to the safety data sheet (SDS) provided by the detergent
manufacturer.
NOTICE
• High-pressure water can damage the device. Keep a distance of at least 1 m (3.3 ft) between the nozzle
and the device.
• Hot water can damage the device. Don’t use water that is hotter than 80° C (176° F).
• Harsh chemicals can damage the device. Don’t use chemicals such as window cleaner or acetone to
clean your device.
• Harsh chemicals can damage the device. Don’t use chemicals such as acetone or gasoline to clean your
device.
• Don’t spray detergent directly on the device. Instead, spray detergent on a nonabrasive cloth and use
that to clean the device.
• Avoid cleaning in direct sunlight or elevated temperatures, since this can cause stains.
1. Use a can of compressed air to remove dust and loose dirt from the device.
2. Use a water hose or high-pressure water to rinse the device.
3. If necessary, clean the device with a soft microfiber cloth dampened with lukewarm water.
4. If necessary, clean the device with a soft microfiber cloth dampened with lukewarm water and mild,
nonabrasive soap.
5. If necessary, clean the device with a soft microfiber cloth dampened with lukewarm water and
detergent.
6. If necessary, apply detergent according to the detergent manufacturer’s instructions.
7. To avoid stains, dry the device with a clean, nonabrasive cloth.
AXIS Q8752-E Mk II Bispectral PTZ Network Camera