48
One-click cloud connection (O3C) together with an O3C service provides easy and secure internet access to live
and recorded video from any location. For more information, see axis.com/end-to-end-solutions/hosted-services.
Allow O3C:
• One-click: This is the default setting. Press and hold the control button on the device to connect to
an O3C service over the internet. You need to register the device with the O3C service within 24 hours
after you press the control button. Otherwise, the device disconnects from the O3C service. Once you
register the device, Always is enabled and the device stays connected to the O3C service.
• Always: The device constantly attempts to connect to an O3C service over the internet. Once you
register the device, it stays connected to the O3C service. Use this option if the control button on the
device is out of reach.
• No: Disables the O3C service.
Proxy settings: If needed, enter the proxy settings to connect to the proxy server.
Host: Enter the proxy server’s address.
Port: Enter the port number used for access.
Login and Password: If needed, enter username and password for the proxy server.
Authentication method:
• Basic: This method is the most compatible authentication scheme for HTTP. It’s less secure than the
Digest method because it sends the username and password unencrypted to the server.
• Digest: This method is more secure because it always transfers the password encrypted across the
network.
• Auto: This option lets the device select the authentication method depending on the supported
methods. It prioritizes the Digest method over the Basic method.
Owner authentication key (OAK): Click Get key to fetch the owner authentication key. This is only possible if
the device is connected to the internet without a firewall or proxy.
SNMP
The Simple Network Management Protocol (SNMP) allows remote management of network devices.
AXIS Q8752-E Mk II Bispectral PTZ Network Camera
To Next Page
Loading...
