58
– Host: Enter the server's IP address or hostname. If you enter a hostname, make sure that a DNS
server is specified under System > Network > IPv4 and IPv6.
– Port: Enter the port number used by the SFTP server. The default is 22.
– Folder: Enter the path to the directory where you want to store files. If this directory doesn’t already
exist on the SFTP server, you will get an error message when uploading files.
– Username: Enter the username for the login.
– Password: Enter the password for the login.
– SSH host public key type (MD5): Enter the fingerprint of the remote host’s public key (a 32-digit
hexadecimal string). The SFTP client supports SFTP servers using SSH-2 with RSA, DSA, ECDSA,
and ED25519 host key types. RSA is the preferred method during negotiation, followed by
ECDSA, ED25519, and DSA. Make sure to enter the right MD5 host key that is used by your
SFTP server. While the Axis device supports both MD5 and SHA-256 hash keys, we recommend
using SHA-256 due to stronger security over MD5. For more information on how to configure
an SFTP server with an Axis device, go to the AXIS OS Portal.
– SSH host public key type (SHA256): Enter the fingerprint of the remote host’s public key (a 43-
digit Base64 encoded string). The SFTP client supports SFTP servers using SSH-2 with RSA,
DSA, ECDSA, and ED25519 host key types. RSA is the preferred method during negotiation,
followed by ECDSA, ED25519, and DSA. Make sure to enter the right MD5 host key that is
used by your SFTP server. While the Axis device supports both MD5 and SHA-256 hash keys,
we recommend using SHA-256 due to stronger security over MD5. For more information on
how to configure an SFTP server with an Axis device, go to the AXIS OS Portal.
– Use temporary file name: Select to upload files with temporary, automatically generated filenames.
The files get renamed to the desired names when the upload completes. If the upload is
aborted or interrupted, you don’t get any corrupt files. However, you probably still get the
temporary files. This way, you know that all files that have the desired name are correct.
• SIP or VMS :
SIP: Select to make a SIP call.
VMS: Select to make a VMS call.
– From SIP account: Select from the list.
– To SIP address: Enter the SIP address.
– Test: Click to test that your call settings works.
• Email
– Send email to: Enter the email address to send emails to. To enter multiple addresses, use commas
to separate them.
– Send email from: Enter the email address of the sending server.
– Username: Enter the username for the mail server. Leave this field empty if the mail server does not
require authentication.
– Password: Enter the password for the mail server. Leave this field empty if the mail server does not
require authentication.
– Email server (SMTP): Enter the name of the SMTP server, for example, smtp.gmail.com, smtp.mail.
yahoo.com.
– Port: Enter the port number for the SMTP server, using values in the range 0-65535. The default
value is 587.
– Encryption: To use encryption, select either SSL or TLS.
– Validate server certificate: If you use encryption, select to validate the identity of the device. The
certificate can be self-signed or issued by a Certificate Authority (CA).
– POP authentication: Turn on to enter the name of the POP server, for example, pop.gmail.com.
Note
AXIS Q8752-E Mk II Bispectral PTZ Network Camera
To Next Page
Loading...
