Index of Contents
03
Parts Breakdown/List for the 10/12" Saw Bench................................................................................... 38-46
Diagram A (Saw Bench Assembly)..............................................................................................................38-39
Diagram B ( Saw Bench Table and Extension Tables Assembly)......................................................40-41
Diagram C (Mitre Fence Assembly)...................................................................................................................42
Diagram D (Saw Mechanism Assembly)...................................................................................................43-44
Diagram E (Rip Fence Assembly).......................................................................................................................45
Diagram F (Sliding Table Assembly).................................................................................................................46
Notes.............................................................................................................................................................................47
Copied from CE Certificate
The undersigned, F. Nispel authorised by
Laizhou Fulin Machinery Co., Ltd.No. 275 Wenquan East
Road Laizhou, Shandong 261400 P.R. China declares
that this product:
Model number
MJ2325D/MJ2330D Table Saw
manufactured by Laizhou Fulin Machinery Co. is in
compliance with the following standards or
standardisation documents inaccordance with Council
Directives
EN 61000-3-3: 1995+A1
EN 55014-2: 1997+A1
EN 61000-3-2: 2000
EN 55014-1: 2000+A1
WARNING!
Under no circumstances should
CHILDREN be allowed in work areas
IT IS RECOMMENDED THAT YOU WEAR EAR PROTECTION
WHEN USING THIS MACHINE
Warning
The symbols below advise that you follow the correct safety procedures when
using this machine.
Dust mask
should be worn
Ear protection
should be worn
Eye protection
should be worn
Fully read manual
and safety instructions
before use
Keep hands away
from moving parts
and cutting area
Foot protection
should be worn
Two man
assembly
To Next Page
Loading...
