Parts Index
05
951537 10" and 951540 12" Saw Bench (Box 2 of 2)
1 off: Rip Fence Assembly (partially assembled)
1 off: Rip Fence Extension
1 off: Short Rip Fence (front rail)
1 off: Short Rip Fence (back rail)
Bag Containing:
2 off: ‘T’ bolts M6 x 70mm and M6 knobs
6 off: M8 x 25mm Square bolts, washer and nuts
2 off: Plastic Capping Plates (for ends of the rip fence mounting bracket)
2 off: Plastic Capping Plates (for ends of front rip fence rail)
8 off: 4mm Round head self tapping screws
1 off: Micro Adjuster Assembly
951538 10" and 951541 12" Table Extension Kits (Box 1 of 2)
2 off: Extension Tables with M8 x 25mm ‘T’ bolts, washers and nuts
1 off: Table support leg
1 off: Threaded rubber foot
Bag Containing:
8 off: M8 x 30mm bolts, washers and nuts
2 off M8 x 20mm bolts washers and nuts
951538 10" and 951541 12" Table Extension Kits (Box 2 of 2)
1 off: Long Rip Fence (front rail)
1 off: Long Rip Fence (back rail)
1 off: Measuring scale extension label
951539 10" and 12" Sliding Table K its ( Box 1 of 2)
2 off: Sliding Table Mounting Brackets
2 off: Steel Clamping Plates (for Mounting brackets)
1 off Work Clamp and Tool Post
1 off: Sliding Table Assembly
Bag Containing:
6 off: M10 x 19mm Hex bolts (for table adjustment)
951539 10" and 12" Sliding Table kits ( Box 2 of 2)
1 off: Sliding Table Rail Assembly
1 off: Mitre Angle Rip Fence Assembly
20
21
22
23
24
24A
24B
24C
24D
24E
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
40A
50
51
Continues Over....
To Next Page
Loading...
