5.3. CALIBRATING THUMBSTICK
If you will be using your keypad for the first time or just recently
reinstalled software or firmware, then you need to calibrate the
thumbstick. Here is steps on how to do it:
Plugin the USB cable of keypad to your PC. Open the Azeron software.
Go to Settings. Make sure the restrictor ring is removed from the
thumbstick! (If you are using software version 1.5 and up, then you
can leave the restrictor ring on the thumbstick). Press on the button
“Calibrate” and carefully follow the instructions on screen.
By pressing on Adjust it manually you can also adjust the global
thumbstick settings as you wish manully, if you need that all your
profiles have equal thumbstick settings.
To Next Page
Loading...
