Baby Lock Solaris VISION BLSA3 - Various Embroidering Functions; Uninterrupted Embroidering (Using a Single Color: Monochrome); Display the Fabric While Aligning the Embroidering Position

VARIOUS EMBROIDERING FUNCTIONS
86
Uninterrupted Embroidering
(Using a Single Color:
Monochrome)
A selected pattern can be stitched out in one color
instead of multicolor. The machine will continue
stitching without stopping for thread changes until
the pattern is completed.
a
In the embroidery screen, touch .
b
Touch .
* Touch the key again to return to the original setting.
 The thread color displayed on the screen will be
grayed out.
Display the Fabric while Aligning
the Embroidering Position
The fabric hooped in the embroidery frame can be
displayed on the LCD so that the embroidery position
can be easily aligned.
Example:
VARIOUS EMBROIDERING FUNCTIONS
Memo
• Even if uninterrupted embroidering has
been set, the automatic thread cutting
function and the thread trimming function can
be used. (page 95, page 96)
Memo
• When embroidery frame (small: H 20 mm × W
60 mm (H 1 inch × W 2-1/2 inches)) is
installed, this function cannot be used.
• For details on using thicker fabric such as
quilting, refer to “Positioning the Pattern on
Thick Fabric” on page 89.