www.baldormotion.com
C-2 Mint Keyword Summary MN1943
Keyword Description
BUSEVENT Returns the next event in the bus event queue of a
specific bus.
BUSEVENTINFO Returns the additional information associated with a bus
event.
BUSNODE To set or read the node ID used by this node for the
specified bus.
BUSPROTOCOL To read the protocol currently supported on a particular
fieldbus.
BUSRESET Resets the bus controller.
BUSSTATE Returns the status of the bus controller .
CANCEL To stop motion and clear errors on an axis.
CANCELALL To stop motion and clear errors on all axes.
CAPTUREBUFFERSIZE To read the total size of the capture buffer.
CAPTURECOMMAND Controls the operation of capture.
CAPTUREDURATION To define the total duration of the data capture.
CAPTUREMODE To set or read the mode on a capture channel.
CAPTUREMODEPARAMETER To specify a parameter associated with CAPTUREMODE.
CAPTURENUMPOINTS To read the number of captured points per channel.
CAPTUREPERIOD To define the interval between data captures.
CAPTUREPRETRIGGER -
DURATION
To set the duration of the pre-trigger phase.
CAPTUREPROGRESS To return the progress of the pre-trigger or post-trigger
capture phase.
CAPTURESTATUS To return the progress of the capture.
CAPTURETRIGGER To generate a capture trigger.
CAPTURETRIGGERABSOLUTE To ignore the sign of the trigger value when triggering
from a capture channel source.
CAPTURETRIGGERCHANNEL To set the channel to be used as the reference source
for triggering.
CAPTURETRIGGERMODE To set the method used to evaluate the trigger source.
CAPTURETRIGGERSOURCE To set the reference source to be used for triggering.
CAPTURETRIGGERVALUE To set the trigger value when triggering from a capture
channel source.
To Next Page
Loading...
