iv Contents
MN1942
8.1.9 BiSS interface (X8) 8-5.............................................
8.1.10 SSI encoder feedback option (X8) 8-5................................
8.1.11 SinCos / EnDat encoder feedback option (X8) 8-6......................
8.1.12 Ethernet interface 8-6..............................................
8.1.13 CAN interface 8-6.................................................
8.1.14 RS485 interface 8-6................................................
8.1.15 Environmental 8-7.................................................
8.1.16 Weights and dimensions 8-7........................................
Appendices
A Accessories A-1........................................
A.1 Introduction A-1............................................
A.1.1 Fan tray A-2......................................................
A.1.2 Footprint filter (single-phase only) A-3.................................
A.1.3 24 V power supplies A-3............................................
A.1.4 EMC filters A-4....................................................
A.1.5 Regeneration resistors A-7..........................................
A.2 Cables A-8................................................
A.2.1 Motor power cables A-8.............................................
A.2.2 Feedback cable part numbers A-10....................................
A.2.3 SSI feedback cables A-10............................................
A.2.4 Encoder / Hall feedback cables A-11...................................
A.2.5 BiSS, EnDat and SinCos feedback cables A-12..........................
A.2.6 Ethernet cables A-12................................................
B Control System B-1.....................................
B.1 Introduction B-1............................................
B.1.1 Servo configuration B-2.............................................
B.1.2 Torque servo configuration B-4.......................................
C Mint Keyword Summary C -1.............................
C.1 Introduction C-1............................................
C.1.1 Keyword listing C-1................................................
D CE&UL C-1...........................................
D.1 Outline C-1................................................
D.1.1 EMC Conformity and CE marking C-1.................................
D.1.2 MicroFlex e100 compliance C-1......................................
D.1.3 Declaration of conformity C-2........................................
D.1.4 Use of CE compliant components C-3.................................
D.1.5 EMC wiring technique C-3...........................................
D.1.6 EMC installation suggestions C-4.....................................
D.1.7 Wiring of shielded (screened) cables C-5..............................
D.2 UL file numbers C-6.........................................
To Next Page
Loading...
