www.baldormotion.com
D-2 CE & UL MN1901
D.1.2 Declaration of conformity
EC Declaration of Con f o rmity
Date: 01/06/02 Ref: DE00011-001
Manufact urer: Baldor UK Limited
Address
: Mint Motion Centre, Hawkley Drive, Bristol Distribution Centre, Bristol, BS32 0BF, United Kingdom
This is t o certify that MintDrive
II
, FlexDrive
II
and Flex+Drive
II
single-axis Servo and Positioning Drives, being one of:-
MDH1Axxxx-xxxx FPH1Axxxx-xxxx FDH1Axxxx-xxxx
MDH2Axxxx-xxxx FPH2Axxxx-xxxx FDH2Axxxx-xxxx
MDH4Axxxx-xxxx FPH4Axxxx-xxxx FDH4Axxxx-xxxx
built after the 1st January 2002, when used in accordance with the guidance giv en in the corresponding Installation
Manuals MN1901 (MintDrive
II
) or MN1902 (FlexDrive
II
and Flex+Drive
II
), conforms with t he protection requirements of
Council Directive 89/336/EEC relating to Electromagnetic Compatibility, by the application of the following standards:-
Standard
:
EN61800-3 : 1996
Title:
Adjustable speed electrical power driv e
systems Part 3: EMC Product standard,
including specific test methods.
Comments:
Emissions & Immunity comply
with both the first (domestic) and s econd
(industr ial) environments.
and in detail with the following basic standards:
Standard
:
EN 61800-3 : 1996
Title:
Conducted Emissions
EN 61800-3 : 1996 Radiated Emissions
EN 61000-4-2 : 1995 ElectroStatic Discharge
EN 61000-4-3 : 1995 Radiated Field Immunity
EN 61000-4-4 : 1995 EFT/Bursts
EN 61000-4-5 : 1995 Surge Immunity
EN 61000-4-6 : 1996 Conducted Immunity
and with the protection requirement s of Council Directive 72/23/EEC (amended by 93/68/EEC) relating to Low Voltage
Equipment, by following the guidance found in the following standard:
Standard
:
EN50178 : 1997
Title:
Electr onic equipment for use in power
installations.
Signed:
Dr. Gerry Boas t
Engineering Manager
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
Need help?
General
