Balluff BTL7 Series Manual

4 english
BTL7-A/C/E/G_ _ _-M_ _ _ _-A/B/Y/Z(8)-S32/S115/S135/S140/KA_ _/FA_ _
Micropulse Transducer - Rod Style
7
Calibration using teach-in 18
8
Calibration using adjustment 19
9
Calibration using online setting 21
10
Resetting all values (reset) 22
11
Technical data 23
11.1 Accuracy 23
11.2 Ambient conditions 23
11.3 Supply voltage (external) 23
11.4 Output 23
11.5 Input 23
11.6 Dimensions, weights 24
12
Accessories 25
12.1 Magnets 25
12.2 Mounting nut 25
12.3 Connectors and cables 26
12.3.1 BKS-S32/S33M-00, freely configurable 26
12.3.2 BKS-S232/S233-PU-_ _, preassembled 26
12.3.3 BKS-S115/S116-PU-_ _, preassembled 27
12.3.4 BKS-S135/S136M-00, freely configurable 27
12.3.5 BKS-S140-23-00, freely configurable 27
12.3.6 Plug-in system, 8-pin 28
13
Ordering code 29
14
Appendix 30
14.1 Converting units of length 30
14.2 Part label 30

Balluff BTL7 Series Specifications

General

Measurement Principle	Magnetostrictive
Resolution	Up to 1 μm (depending on model)
Operating Temperature	-40°C to +85°C
Protection Class	IP67
Housing Material	Aluminum
Output Signal	Analog
Supply Voltage	10V to 30V DC