ALPHA 2 Pro™ Wave Operator’s Instruction Manual
MKT-AH-1CC40ST [A] 17
STEP 3. Align the holes of the monitor with the holes of the
monitor hinge, secure it with eight screws, and
continue holding the monitor.
STEP 4. Secure the upper door struts to the cabinet using
fasteners previously removed.
CAUTION
The upper door is not attached to the cabinet. To
prevent injury or damage, have a technician hold
each side of the upper door firmly.
CAUTION
The gas springs are not attached to the cabinet. To
prevent injury or damage, hold the struts during
installation.
MKT-AH-1CC40ST.book Page 17 Friday, November 15, 2013 3:47 PM
To Next Page
Loading...
