ALPHA 2 Pro™ Wave Operator’s Instruction Manual
18 MKT-AH-1CC40ST [A]
STEP 5. Align the holes of the door struts with the holes of the
provided door brackets and secure with a clevis pin.
STEP 6. Reconnect all cables previously disconnected.
STEP 7. To close the upper door, press the upper door down
until it connects to the cabinet frame securely, then
turn the upper right lock of the middle door
counterclockwise.
CAUTION
The gas springs are not attached to the cabinet. To
prevent injury or damage, hold the struts during
installation.
The upper door is not attached to the cabinet. To
prevent injury or damage, have a technician hold
each side of the upper door firmly.
MKT-AH-1CC40ST.book Page 18 Friday, November 15, 2013 3:47 PM
To Next Page
Loading...
