Page 42
a
c
b
3. Reinstall the main burners
making sure that each burner
is properly engaged onto the
valve as shown.
4. a. Take off the main burner control knobs
(leave the rear burner control knob as is).
b. Locate each main burner low flame
screw and adjust for NG by turning it
anticlockwise two full turns (720°).
(For reference, the LPG low flame position
is 720° anticlockwise from the clockwise full
stop position. The NG low flame position is
1440° anticlockwise from the clockwise full
stop position).
c. Replace the main burner control knobs.
5. Where a rear burner is fitted,
detach the rear burner cover
by removing the fixing screws
from inside the hood as
shown.
Converting from LPG to NG (continued)
To Next Page
Loading...
