164 ImagePRO-II • User’s Guide
B. Remote Control Protocol
Legacy Remote Commands
obpl=çìí=åå
• Description: Set Output Resolution.
• Parameters: out - Output chnl[0-1]
nn: Output Resolution (Use RESH command for resolution list)
• Query Format:
RESO? out
Returns the Output Resolution in the format:
= nn
RESO 0 1 (Set Output Resolution of output 0 to resolution index 1
(NTSC(480i))
RESO? (Queries Output Resolution)
obpbq
• Description: Resets the system and sets all settings to factory defaults.
• Parameters: None
RESET (Factory reset the ImagePRO-II)
oqb=áå
• Description: Selects and routes input to be processed.
• Parameters:
in: Input [1-7]
1 = DVI, 2 = HD15, 3 = HDMI, 4 = DisplayPort, 5 = SDI,
6 = Black, 7 = Logo
• Query Format:
RTE?
Returns the input channel that is routed in the format
= in
RTE 2 (Selects input 2 for processing.)
RTE? (Queries the input channel that is routed.)
pvp^s
• Description: Saves the System State to non-volatile memory
• Parameters: None
SYSAV (Saves System State.)
To Next Page
Loading...
