Need help?Do you have a question about the Barco LED-PRO and is the answer not in the manual?
General| Brand | Barco |
|---|---|
| Model | LED-PRO |
| Category | Computer Hardware |
| Language | English |
Introduces the LED-PRO, a powerful all-in-one signal processor for driving Barco LED displays.
Lists the key features of the LED-PRO, including universal inputs, aspect ratio conversion, and 10-Bit processing.
Illustrates a sample connectivity diagram for the LED-PRO system, showing input and output connections.
Details the components and sections of the LED-PRO's front panel interface.
Provides a detailed description of all connectors and ports located on the rear panel of the LED-PRO.
Outlines critical safety and handling rules to prevent injury and equipment damage during installation.
Guides the user through connecting power to the LED-PRO unit and associated equipment.
Explains how to connect source devices to the LED-PRO inputs and the output to the LED wall.
Describes the various methods available for controlling the LED-PRO system.
Details the sequence of screens displayed during the LED-PRO's power-up and initialization process.
Provides steps for optimizing system setup and operations using the Setup and Input Wizards.
Details how to set up LED-PRO input, output, and system parameters using the Setup Menu.
Guides users through quickly configuring an LED wall and system output without the Director Toolset.
Facilitates easy setup and alignment of input sources, automatically detecting and re-scaling them.
Provides access to advanced system setup functions for experienced users.
Resets the LED-PRO to its factory default condition, deleting all user configurations.
Guides users through setting up and aligning input sources, including position and gamma adjustments.
Provides access to extensive advanced system setup functions.
Explains how firmware files are loaded and upgraded using a serial connection.
Details the step-by-step procedure for upgrading LED-PRO software using a serial connection.
Lists the detailed technical specifications for all LED-PRO inputs.
Details the technical specifications for the LED-PRO's video output.
Lists the physical dimensions, power requirements, and environmental specifications.
Lists the default serial communication parameters for Diagnostics and RS-232 ports.
Lists and categorizes all available remote commands for controlling the LED-PRO.
Lists remote commands for controlling input settings such as acquisition and de-interlacing.
Lists remote commands for controlling output parameters like contrast, gamma, and sync.
Provides detailed descriptions and usage examples for LED-PRO serial commands.
To Next Page
