Barco LED-PRO - Ivtotal

144 LED-PRO • User’s Guide
_K==oÉãçíÉ=`çåíêçä=mêçíçÅçä
LED-PRO Remote Commands
• Query:
ITYPE? in
Returns the Input Type selected for the specified input channel in the format
= mode
S ITYPE 1 2 (Sets Input type to YPbPr on input channel 1.)
S ITYPE? 1 (Queries Input type for channel 1)
fs^qs=åååå
• Description: Set Input Vertical Active. The minimum and maximum limit is
dependent on the input resolution.
• Parameters: nnnn - Input Vertical Active: nnnn[(Actual Input V Active * 2/10,
absolute minimum of 150) - + (Actual Input V Active *6/5, absolute maximum of
Input V Total - Input V Sync)]
• Query:
IVATV?
Returns the Input's Vertical Active value in the format
= nnnn
S IVATV 768 (Set Input Vertical Active to 768)
S IVATV? (Queries Input Vertical Active)
fsmlp=åååå
• Description: Set Input Vertical Position. The minimum and maximum limit is
dependent on the input resolution.
• Parameters: nnnn - Input Vertical Position: nnnn[(Input V Sync) - + (Input V Total
- Input V Active)]
• Query:
IVPOS?
Returns the Input's Vertical Position value in the format
= nnnn
S IVPOS 35 (Set Input Vertical Position to 35)
S IVPOS? (Queries Input Vertical Position)
fsqlq^i\
• Description: Query Input Vertical Total.
• Parameters: None
• Returns: nnnn - Input Vertical Total
S IVTOTAL? (Queries Input Vertical Total)
fsob`=áå
• Description: Input Channel View (Preset) Recall
• Parameters: in - Input chnl [1-4]