Barco LED-PRO - Minmode; Minstat; Lockout; Logod

156 LED-PRO • User’s Guide
_K==oÉãçíÉ=`çåíêçä=mêçíçÅçä
LED-PRO Remote Commands
jfkjlab
• Description: Set Minimum Delay Mode
• Usage: MINMODE mode [0|1] disable|enable
jfkpq^q
• Description: Query Minimum Delay Status
• Usage: MINSTAT mode [0|1] disable|enable
il`hlrq
• Description: Locks and unlocks the front panel
• Usage: LOCKOUT (0 = off, 1 = on)
ildla
• Description: Delete Logo image from non-volatile memory. Selecting Black/
Logo channel will now display black.
• Parameters: None
S LOGOD (Delete saved Logo image.)
ildli
• Description: Load current output image from non-volatile memory as Logo
image.
• Parameters: None
S LOGOL (Load current output image as Logo image.)
ildlp
• Description: Save current output image in non-volatile memory as Logo image.
• Parameters: None
S LOGOS (Save current output image as Logo image.)
ildlf
• Description: Query the stored Logo image resolution.
• Parameters: None
S LOGOI (Query Logo resolution.)
qok=íóéÉ=å
• Description: Selects transition type when switching between input channels.
Transition delay is only applicable if the transition type selected is Fade to black /
Fade to logo. Fade to logo transition type only selectable if Logo has been stored
in non-volatile memory.