LED-PRO • User’s Guide 109
4. Operation
Using the Input Position Menu
oÉÅ~ää=`çåÑáÖ
From the Input Position Menu, select Recall Config to display the Recall Config Menu,
which enables you to recall input configurations that were previously saved for the currently
selected input format and type.
Figure 4-91. Recall Config Menu (sample)
To recall an input configuration:
1. Scroll to the filename field (e.g., File1) and press SEL. The navigation cursor (>)
changes to the edit cursor (#), allowing you to browse the file list.
2. Choose a file by turning the knob, and “accept” it by pressing SEL.
3. Scroll to the Recall Config line and press SEL to recall the file.
RECALL CONFIG
> File1
Recall Config
Note
This function is the same as the Recall Config function
located in the Input Setup Menu (SETUP > Expert Mode >
Input). It is also located here for operator convenience.
To Next Page
Loading...
