Barco LED-PRO - Enetm; Edhcp

154 LED-PRO • User’s Guide
_K==oÉãçíÉ=`çåíêçä=mêçíçÅçä
LED-PRO Remote Commands
• Usage: ENETM mode [0|1] Off|On
bae`m
• Description: Sets DHCP mode.
• Parameters: mode - DHCP mode [0-1] Off | On
• Query:
EDHCP?
Returns the DHCP mode in the format
= mode
S EDHCP 1 (Sets DHCP mode to On)
S EDHCP? (Queries the DHCP mode)
bb`el=ãçÇÉ
• Description: Disable/Enable echo on telnet window (for Microsoft Windows XP
telnet window, echo must be disabled.)
• Parameters: mode - Disable/Enable telnet echo (0 / 1)
S EECHO 0 (Disable echo on telnet window)
bfm=ñññKñññKñññKñññ==óóóKóóóKóóóKóóó=òòòKòòòKòòòKòòò
• Description: Set static IP address, subnet mask and default Gateway IP
• Parameters:
IP address - xxx.xxx.xxx.xxx (xxx: [0-255])
Subnet mask - yyy.yyy.yyy.yyy (yyy: [0-255])
Gateway IP - zzz.zzz.zzz.zzz (zzz: [0-255])
• Query:
EIP?
Returns the Ethernet IP address, Subnet mask and Gateway IP in the format
= xxx.xxx.xxx.xxx yyy.yyy.yyy.yyy
zzz.zzz.zzz.zzz
S EIP 192.168.000.200 255.255.255.000 192.168.000.001 (Sets IP address to
192.168.0.200, subnet mask to 255.255.255.0, and default Gateway IP to
192.168.0.1)
S EIP? (Returns IP address, subnet mask and Gateway IP)
bj^`\
• Description: Query Ethernet MAC address for the LED-PRO. Note that each
LED-PRO unit will have a different MAC address.
• Parameters: None
Note
If DHCP is used, Subnet mask and Gateway IP is not used by
the LED-PRO.