Barco LED-PRO - Brightness

44 LED-PRO • User’s Guide
4. Operation
Using the Setup Menu
_êáÖÜíåÉëë
From the Analog Source Alignment Menu, select Brightness to adjust the overall
brightness of the selected analog input.
• The adjustment range is 75.0% to 125.0%.
• 100% is the default setting.
oÉÇ=`çåíê~ëí
From the Analog Source Alignment Menu, select Red Contrast to adjust the contrast of
the selected input’s red channel.
• The adjustment range is -25.0% to +25.0%.
• 0.0% is the default setting.
oÉÇ=_êáÖÜí
From the Analog Source Alignment Menu, select Red Bright to adjust the brightness of
the selected input’s red channel.
• The adjustment range is -25.0% to +25.0%.
• 0.0% is the default setting.
dêå=`çåíê~ëí
From the Analog Source Alignment Menu, select Grn Contrast to adjust the contrast of
the selected input’s green channel.
• The adjustment range is -25.0% to +25.0%.
• 0.0% is the default setting.
dêå=_êáÖÜí
From the Analog Source Alignment Menu, select Grn Bright to adjust the brightness of
the selected input’s green channel.
• The adjustment range is -25.0% to +25.0%.
• 0.0% is the default setting.
_äìÉ=`çåíê~ëí
From the Analog Source Alignment Menu, select Blue Contrast to adjust the contrast of
the selected input’s blue channel.
• The adjustment range is -25.0% to +25.0%.
• 0.0% is the default setting.
_äìÉ=_êáÖÜí
From the Analog Source Alignment Menu, select Blue Bright to adjust the brightness of
the selected input’s blue channel.
• The adjustment range is -25.0% to +25.0%.
• 0.0% is the default setting.