Barco LED-PRO - Efsav; Efdel; DMSG Mode

LED-PRO • User’s Guide 153
_K==oÉãçíÉ=`çåíêçä=mêçíçÅçä
LED-PRO Remote Commands
Returns the custom format's Vertical Sync value in the format
= nn
S EFVSYNC 2 (Set custom format V Sync as 2)
S EFVSYNC? (Query the custom format's V Sync value)
bcso^qb=åååKå
• Description: Set custom format's Vertical Rate value.
• Parameters: nnn.nn - V Rate [20.00 - 120.00]
• Query:
EFVRATE?
Returns the custom format's Vertical Rate value in the format
= nnn.n
S EFVRATE 59.94 (Set custom format V Rate as 59.94)
S EFVRATE? (Query the custom format's V Rate value)
bcp^s
• Description: Saves currently defined custom format to non-volatile memory.
• Parameters: filename - name given to custom format when it is stored. This
filename is translated to all upper case characters. If same custom format name
exist, it will be overwritten.
S EFSAV format1 (saves custom format as FORMAT1.)
bcabi
• Description: Deletes saved custom format. This filename is translated to all
upper case characters
• Parameters: filename - name of custom format to be deleted (translated to upper
case).
S EFDEL FORMAT1 (Deletes custom format with the name "FORMAT1".)
ajpd=ãçÇÉ
• Description: Sets Debug message display mode.
• Parameters: mode - DMSG mode [0-1] Off | On
• Query:
DMSG?
Returns the Debug message display mode in the format
= mode
S DMSG 1 (Sets Debug message mode to On)
S DMSG? (Queries the DMSG mode)
bkbqj
• Description: Set Ethernet Mode