Barco LED-PRO - Output

80 LED-PRO • User’s Guide
4. Operation
Using the Expert Mode Menu
lìíéìí
From the Expert Mode Menu, select Output to display the LED Output Menu which
enables you to configure the LED-PRO output.
Figure 4-63. LED Output Menu
Following are descriptions of each menu function:
• Timing Adjust
• Refresh Rate
• LED Control
• LED Status
• LED Contrast
• LED Gamma
• LED Information
• Lock to Source
• Minimum Delay
• Save Config
• Reset Config
LED OUTPUT
> Timing Adjust >>
Refresh Rate 60 Hz
LED Control Local
LED Status Enabled
LED Contrast 100%
LED Gamma Indoor 2
LED Information >>
Lock To Source >>
Minimum Delay >>
Save Config
Reset Config