76 ImagePRO-II • User’s Guide
4. Menu Orientation
About Transition Effects
Figure 4-62. Transition Menu
pÉííáåÖ=qê~åëáíáçåë
To set the transition type and timing, use the following procedure:
1. Select the input you want to transition from.
2. From the Setup Menu, select Transition. The Transition Menu appears.
3. Set the transition mode by selecting Trans With, and scrolling to the type you
want. Press SEL.
If you selected Black Fade or Logo, you can now set the transition time. If you
selected Image Cut, you are finished.
4. For the Black Fade and Logo modes, scroll to Trans Time and press SEL.
5. Select a new transition time and press SEL again.
Your settings are saved for this input.
TRANSITION
> Trans With Blk Fade
Trans Time 1.0
To Next Page
Loading...
