22 ImagePRO-II • User’s Guide
3. Hardware Installation
Installation
n. Connect the ImagePRO-II’s Ethernet port to the external device. The
devices you can use to control the ImagePRO-II remotely include:
• Smartphone (iPhone
®
, Android™, etc.)
• PC, notebook, laptop, or tablet with a compatible OS and
browser
There may be additional steps needed, such as turning on the DHCP feature or
setting a static IP address. For more information, contact your network
administrator or refer to Chapter 5.
12. Encore or ScreenPRO-II Controller Connection
For information about connecting the ImagePRO-II to the Encore (release 2.32 or
higher) or ScreenPRO-II Controller, refer to the Encore Presentation System
User’s Guide or the ScreenPRO-II Controller User’s Guide.
To Next Page
Loading...
