ImagePRO-II • User’s Guide 65
4. Menu Orientation
Acquiring an Input Signal
the Invalid Signal message.
Please note the following important points regarding In Auto Acquire:
• It is recommended that you turn Off In Auto Acquire in applications where you
have already configured and saved the system’s input setup.
• If In Auto Acquire is On and a valid input is selected that does not have a saved
input configuration file associated with it, the system attempts to detect and
acquire the source. This process may take a few moments.
• If In Auto Acquire is Off the system uses the last-known configuration for each
input, to the extent possible, comparing the input’s timing to the configurations in
the system’s library. These configurations can be custom files or system default
configurations.
~ If the input timing matches a configuration file, either the timing or the
configuration file name appears in the Status Menu, and the system
displays the image.
~ If the timings do not match, the Invalid Signal message appears in the
Status Menu.
Note
Most users can leave In Auto Acquire on. Advanced users
who know the input video timing parameters may choose to
turn In Auto Acquire off and select the parameters manually.
To Next Page
Loading...
