8. Important information
8. IMPORTANT INFORMATION
8.1 Safety information
General recommendations
Read the safety and operating instructions before operating the device.
Retain safety and operating instructions for future reference.
Adhere to all warnings on the device and in the operating instructions manual.
Follow all instructions for operation and use.
Electrical Shock or Fire Hazard
To prevent electric shock or fire hazard, do not remove cover.
No serviceable parts inside. Refer servicing to qualified personnel.
Do not expose this apparatus to rain or moisture.
Modifications to the unit:
Do not modify this equipment without authorization of the manufacturer.
Type of protection (Electrical)
Device with external power supply: Class I equipment.
Degree of safety (flammable anesthetic mixture):
Equipment not suitable for use in the presence of a flammable anesthetic mixture
with air or with oxygen
or nitrous oxide.
Power con nection – Equ ipment with external 12 VDC power suppl
y
• Power requirements: The equipment must be powered using the d
elivered medical approved 12 VDC
(
) power supply.
• The medical approved DC (
) power supply must be powered by the AC mains voltage.
• The power supply is specified as a part of the ITE equipment or comb
ination is specified as an ITE
system.
• To avoid the risk of electric shock, this equipment must only be connected to a supply mains with
protective earth.
• The equipment should be installed near an easily accessible outlet.
• The equipment is intended for continuous operation.
Transient over-voltage
If the device is not used for a long time, disconnect it from the AC inlet to avoid damage by transient
over-voltage.
To fully disengage the power to the device, please disconnect the power cord from the AC inlet.
K5903129 NGS-D320 29/09/2016
49
To Next Page
Loading...
Need help?
General
