8. Important information
8.4 EMC notice
European Union EMC Directive Conformance Statement
This product is in conformity with the protection requirements of EU Council Directive 2004/108/EC on the
approximation of the laws of the Member States relating to electromagnetic compatibility.
Barco cannot accept responsibility for any failure to satisfy the protection requirements resulting from a
nonrecommended modification of the product.
This product has been tested and found to comply with the limits for Class A Information Technology
Equipment according to CISPR 22/European Standard EN 55022. The limits for Class A equipment were
derived for commercial and industrial environments to provide reasonable protection against interference
with licensed communication equipment.
WARNING: This equipment is compliant with Class A of CISPR 32. In a residential en-
vironment this equipment may cause radio interference
8.5 Explanation of sym bo ls
Symbols on the device
On the device or power supply, you may find the following symbols (nonrestrictive list):
Indicates the device meets the requirements of the applicable EC directives.
Indicates compliance with Part 15 of the FCC rules (Class A or Class B)
Indicates the device is approved according to the UL Recognition regulations
Indicates the device is approved according to the UL regulations for Canada
and US
Indicates the device is approved according to the UL Demko regulations
Indicates the device is approved according to the CCC regulations
Indicates the device is appro
ved according to the VCCI regulations
Indicates the device is approved according to the KC regulations
K5903129 NGS-D320 29/09/2016 53
To Next Page
Loading...
Need help?
General
