R5905753 /17 DPxK-19B/23B/P28
instructions see chapter “ICMP(-X)”, page 97, and user guide of the Communicator and/or (Web)
Commander.
In case the projector is equipped with a HD-SDI input module apply a single or dual channel SMPTE (HD-
SDI) source to the input ports of the HD-SDI input module and start up the projector. See chapter “Input &
communication”, page 77. Use the Communicator (Touch Panel) to configure the applied source. See the
user guide of the Communicator (Touch Panel) for more detailed information.
In case the projector is equipped with an Integrated Media Block (IMB) or Integrated Media Server (IMS)
see user guide of the IMB or IMS for detailed instructions.
General
To Next Page
Loading...
Need help?
General
