5. Lenses & lens holder
5.4 Lens removal
How to remove a lens?
1. Support the lens with one hand while you unlock the lens holder by sliding the loc k handle towards the “unlocked” position as
illustrated.
Image 5-21
Unlock lens
2. Gently pull the lens out of the lens holder.
Image 5-22
Remove lens
It’s recomme nded to place the Lens cap s of the original L ens packaging, back o n both sides o f the removed
Lens to protect the optics of the Lens.
It’s recommended to place the foam rubber of the original p rojector packaging, back into the Lens opening to
prevent intrusion of dust. Note that this foam rubber is packed in a plastic bag to prevent the dust, emitted by
the fo am , from ente r i ng th e projector.
76 R5905963 PROMETHEUS SERIES 09/03/2015
To Next Page
Loading...
