99R5905753 /17 DPxK-19B/23B/P
7.1 ICMP(-X) introduction
About ICMP(-X)
The ICMP(-X) is a removable electronic assembly situated in the Card Cage of the projector. The ICMP(-X)
stores, decrypts and decodes DCI cinema content and delivers it to the projector in a usable format, all
integrated into a single assembly placed directly in the projector. ICMP(-X) is a fully integrated assembly so
expected by the operators to facilitate their daily business.
The standard Integrated Cinema Processor functionality from Texas Instruments® is fully integrated into the
ICMP(-X). So, the ICMP(-X) replaces the ICP(-D) board as well.
The ICMP(-X) is located in the Card Cage of the projector.
Image 7–2
1 ICMP(-X)
2 HDDs for ICMP(-X)
As an integrated component of the projector, installation and maintenance of the ICMP(-X) requires the same
skills and the same precautions as an intervention on the projector itself.
For order info see www.barco.com.
Front face of the ICMP-X
Image 7–3 Front face ICMP-X (standard with storage controller GEN 2)
ICMP(-X)
To Next Page
Loading...
Need help?
General
