R5911443 /11 UDM144
Tip: If you already connected to this network in the past using this projector, the software will
remember the user name and password, ensuring you do not have to fill this in again.
6. Press Connect to connect to the selected network.
7. If required by the chosen wireless network, fill in the user name and password and confirm.
An automatic IP address is assigned.
When connected to this network, it is indicated in the upper right corner of the menu with the term
“connected”.
How to manually set up the IP address
1. In the main menu, select Settings → Communication → WiFi.
Image 10–18 Communication menu, WiFi
The WiFi menu is displayed.
Image 10–19 Example of the WiFi menu
2. Make sure the Enable slider is set to the right to enable the WiFi module. The color of the slider becomes
blue.
3. Disable the Automatic slider by setting it to the left. The switch becomes gray.
Image 10–20
GUI – System Settings
To Next Page
Loading...
Need help?
General
