R5911443 /11 UDM168
This means that when a Flex resolution lower then 4K is chosen (e. g. WUXGA), 4K content can still be
displayed. However, this content will be displayed alongside an persistent notification box proposing to limit
the source resolution or upgrade the resolution license.
This way, the user can still see enough content to go through the necessary menus (either to change
resolution or update the Flex license), while enough of the screen is blocked for it to be a hindrance for the end
purpose.
Setting the resolution via OSD menu
1. In the main menu, select Settings → Maintenance → Flex → Resolution.
Image 10–66 Flex menu - Resolution
The Flex Resolution menu is displayed.
Image 10–67 Example of the Flex Resolution menu
2. Choose the desired Resolution for which you have a code available.
3. Enter the code via the OSD menu and confirm.
10.19 Rigging frame Calibration
How to calibrate the motorized rigging frame
1. In the main menu, select Settings → Maintenance → Frame Calibration.
Image 10–68 Maintenance menu, Frame calibration
The Frame calibration menu is displayed.
GUI – System Settings
To Next Page
Loading...
Need help?
General
