Barco UDM - A.4 Specifications for UDM W22

207R5911443 /11 UDM
Warranty 3 years
*Note *Brightness levels +/- 10%
** Wifi and GSM options are not available in all countries. Check with your
Barco representative for more info.
***at higher altitude light output might be dimmed
A.4 Specifications for UDM W22
Projector type WUXGA 3-chip DLP digital projector
Technology 0.96" DMDTM x3
Resolution 1,920 x 1,200
Brightness 21,000 center lumens / 20,000 ansi lumens / 22,000 ISO lumens*
Contrast ratio Full field 2200:1 / Barco Dyna Black 20000:1
Brightness uniformity 93%
Aspect ratio 16:10
ScenergiX Horizontal and vertical edge blending
Lenses TLD+ 0,37; 0,65-0,85; 0.73:1 ; 1.2:1 ; 0,8-1,16; 1,25 -1.6:1 ; 1.5-2.0:1 ; 2.0-
2.8:1 ; 2.8-4.5:1 ; 4.5-7.5:1 ; 7.5-11.5:1
Optical lens shift Vertical between -100% to +130%, depending on lens
Horizontal up to +/- 40%, depending on lens
Motorized zoom and focus (with lens memory on TLD lenses)
Motorized lens shift (with position memory on all lenses)
Color correction P7
Light source Laser phosphor
Light source lifetime 20,000hr (at 100% laser power, DynaBlack = off)
Optical dowser Digital + mechanical internal
Picture-by-picture Two sources simultaneously
Sealed DLP™ core Standard
Orientation 360°
DMX 512 Standard
WARP Direct adjust OSD + toolset
Image processing Embedded warp & blend
Processing Pulse electronics
Keystone correction Yes
Integrated web server Yes
CLO (constant light output) Standard
3D Active eye wear (optional), passive circular (optional); 2 flash up to 200Hz
Inputs Single HDBaseT; HDMI2.0 (HDCP2.2, HDR10); DP1.2 (HDCP 1.3); Quad
3G/12G SDI/BarcoLink ULTRA
Specifications