Barco UDM - 3 Pulse Remote Control Unit

33R5911443 /11 UDM
3.1 Pulse RCU, battery installation ......................................................................................................34
3.2 Pulse RCU, protocol setup ............................................................................................................35
3.3 Pulse RCU, function of the on/off button .........................................................................................36
3.4 Using the RCU .............................................................................................................................36
3.5 Pulse RCU, Functionality overview ................................................................................................37
3.6 Pulse RCU, function of the “button pressed indicator” ......................................................................37
3.7 Pulse RCU, function of the “RGB filter” button .................................................................................38
3.8 Pulse RCU, functions of the “Projector OSD on/off” button ...............................................................38
3.9 Displaying and Programming addresses into the RCU.....................................................................38
3.10 Using the XLR connector of the RCU .............................................................................................39
3.11 Using the mini-jack connector of the RCU.......................................................................................39
3.12 Pulse RCU, silicone protection sleeve (optional) .............................................................................40
Pulse Remote
Control Unit
3