171R5911443 /11 UDM
Image 10–74 Maintenance menu, operational mode
The Operational Mode menu is displayed.
Image 10–75 Example of the Operational modes menu
2. Choose the desired operational mode.
You may immediately notice a small difference, depending on the chosen operational mode.
3. Navigate to the Illumination menu and update the desired light output, depending on the chosen
operational mode.
Note: If the light source cannot sustain the desired power, it will automatically be reduced to a
power level that’s sustainable for the light source and the chosen cooling power.
10.22 Capture mode
Why use capture mode?
Various technical features are used inside the projector to display the best possible image on the projected
surface. However, in expositions and setups where visitors are expected to film or take pictures of the
projected surface, some of these technical features may have side-effects on the captured footage, such as
solarization.
Enabling the Capture mode feature disables some of the technical features of the projector that are known to
cause solarization and gives the visiting audience an experience they can “capture” and post on social media
without worries.
How to enable Capture mode
1. In the main menu, navigate to Settings → System .
2. In the Lens menu, click Capture mode to toggle between On and Off.
GUI – System Settings
To Next Page
Loading...
