R5911443 /11 UDM198
Image 14–6
2. Remove the filter from the projector.
Image 14–7
3. Clean the filter with lukewarm water, and let dry.
4. Reinstall the filter in to the correct position.
5. Reinstall the side cover in the correct position, and press the “easylock”s
Note: Ensure that the cover is in correct position, and correctly locked to the projector.
Removing the front filter
1. Unlock the “easylocks”, and remove the front cover.
Image 14–8
2. Remove the filter from the front cover.
Product maintenance
To Next Page
Loading...
