Barco UDM - Page 204

R5911443 /11 UDM204
Aspect ratio 16:10
ScenergiX Horizontal and vertical edge blending
Lenses TLD+ 0,37; 0,65-0,85; 0.73:1 ; 1.2:1 ; 0,8-1,16; 1,25 -1.6:1 ; 1.5-2.0:1 ; 2.0-
2.8:1 ; 2.8-4.5:1 ; 4.5-7.5:1 ; 7.5-11.5:1
Optical lens shift Vertical between -100% to +130%, depending on lens
Horizontal up to +/- 40%, depending on lens
Motorized zoom and focus (with lens memory on TLD lenses)
Motorized lens shift (with position memory on all lenses)
Color correction P7
Light source Laser B + Red compensator and inorganic Ph wheel
Light source lifetime 20,000hr (at 100% laser power, DynaBlack = off)
Optical dowser Digital + mechanical internal
Picture-by-picture Two sources simultaneously
Sealed DLP™ core Standard
Orientation 360°
DMX 512 Standard
WARP Direct adjust OSD + toolset
Image processing Embedded warp & blend
Processing Pulse electronics
Keystone correction Yes
Integrated web server Yes
CLO (constant light output) Standard
3D Active eye wear (optional), passive circular (optional); 2 flash up to 200Hz
Inputs Single HDBaseT; HDMI2.0 (HDCP2.2, HDR10); DP1.2 (HDCP 1.3); Quad
3G/12G SDI/BarcoLink ULTRA
Optional Inputs Quad DP1.2 / Fiber SFP
Input resolutions From NTSC up to 4K (4,096 x 2,160)
Refresh rates:
24hz to 120 Hz 4K/4KUHD (4096 x 2160 / 3860 x 2400) to 240hz WQXGA
(2560 x 1600)
Max. pixel clock 600 MHz
Software tools Projector Toolset + Android** app + iOS** app
Control XLR wired + IR, RS232, Wifi**, GSM **
Network connection 10/100 base-T, RJ-45 connection, Wifi**
Power requirements 120-160 V (max 70% brightness)18.5A / 200-240V (+/- 10%), 13.5A, 50-
60Hz
Max. power consumption 1900W nom/ 2200w max @ 230 volts ECO STBY<2W
1300W nom/ 1530w max @ 120 volts ECO STBY<2W
Noise level (typical at 25°C/
77°F)
49 dB(A)
Specifications