Barko Hydraulics 930 - Right Side Instrument Panel Controls

page 24page 24
page 24page 24
page 24
930/937 Mulcher (O)
800-00256
1
Ignition Key SwitchIgnition Key Switch
Ignition Key SwitchIgnition Key Switch
Ignition Key Switch
Turn switch to one of four positions: Accessory, Off,
On or Start.
Start position is used to start engine. Once engine
starts, let key move to ON position for running.
22
22
2
Cooling Fan REVCooling Fan REV
Cooling Fan REVCooling Fan REV
Cooling Fan REV
Reverses the cooling fan to help clean the dust of the
radiator
3.3.
3.3.
3.
Windshield Blow - OffWindshield Blow - Off
Windshield Blow - OffWindshield Blow - Off
Windshield Blow - Off
Gives a shot of air to the windshield to blow off dust.
4.4.
4.4.
4.
AttachmentAttachment
AttachmentAttachment
Attachment
Push up to turn on attachment, Push down to turn off
attachment
ATTACHMENT MUST BE OFF TO STARTATTACHMENT MUST BE OFF TO START
ATTACHMENT MUST BE OFF TO STARTATTACHMENT MUST BE OFF TO START
ATTACHMENT MUST BE OFF TO START
ENGINE!ENGINE!
ENGINE!ENGINE!
ENGINE!
5.5.
5.5.
5.
Control PowerControl Power
Control PowerControl Power
Control Power
Push up to activate controls, push down to turn
controls off.
6.6.
6.6.
6.
Park Brake LockPark Brake Lock
Park Brake LockPark Brake Lock
Park Brake Lock
Applies parking brake.
7.7.
7.7.
7.
ThrottleThrottle
ThrottleThrottle
Throttle
Turn Clockwise to increase the RPM of the engine.
Turn Counter Clockwise to decrease the RPM of the
engine. Push the dial in for idle.
8.8.
8.8.
8.
WinchWinch
WinchWinch
Winch
Push button up to turn on, Push button down to turn
off
9.9.
9.9.
9.
Blank PlugBlank Plug
Blank PlugBlank Plug
Blank Plug
10.10.
10.10.
10.
Float LevelFloat Level
Float LevelFloat Level
Float Level
Turn the dial to adjuct the down pressure on the
mulcher for the auto float pressure.
11.11.
11.11.
11.
Float On OffFloat On Off
Float On OffFloat On Off
Float On Off
Turn switch on for auto float to be activated.
FLOAT MUST BE OFF TO STARTFLOAT MUST BE OFF TO START
FLOAT MUST BE OFF TO STARTFLOAT MUST BE OFF TO START
FLOAT MUST BE OFF TO START
ENGINE!ENGINE!
ENGINE!ENGINE!
ENGINE!
SEE NOTES - NEXT PAGESEE NOTES - NEXT PAGE
SEE NOTES - NEXT PAGESEE NOTES - NEXT PAGE
SEE NOTES - NEXT PAGE
FOR FIXED VS. VARIABLE FLOAT FUNCTIONFOR FIXED VS. VARIABLE FLOAT FUNCTION
FOR FIXED VS. VARIABLE FLOAT FUNCTIONFOR FIXED VS. VARIABLE FLOAT FUNCTION
FOR FIXED VS. VARIABLE FLOAT FUNCTION
INSTRUMENT PANEL RIGHT SIDE OF CAB
1
2
3
4
5
6
7
8
9
10
11
12
13
14
14b
14a
14c
14d 14e 1 4 f 14g
14h
14i
INSTRUMENT PANEL RIGHT SIDE OF CAB
CONTINUED - NEXT 2 PAGES