Barko Hydraulics 930 - Page 33

page 33page 33
page 33page 33
page 33
930/937 Mulcher (O)
800-00256
MURPHY POWER VIEW OPERATION CONTINUED...
OPERATIONOPERATION
OPERATIONOPERATION
OPERATION
POWERVIEW MENUS (FIRST TIME START UP)POWERVIEW MENUS (FIRST TIME START UP)
POWERVIEW MENUS (FIRST TIME START UP)POWERVIEW MENUS (FIRST TIME START UP)
POWERVIEW MENUS (FIRST TIME START UP)
1. When power is first applied to the display, the Murphy logo appears.
2. If the Engine ECU is broadcasting a ‘Wait To Start’ message, this screen will be shown. Engine manufacturers
typically recommend against starting the engine while this message is broadcasted from the ECU. Once the
ECU stops broadcasting this message, this screen will no longer be displayed.
3. Once the engine has started, the single engine parameter appears with the engine RPM displayed. Pressing
the
Right Arrow Key Right Arrow Key
Right Arrow Key Right Arrow Key
Right Arrow Key will display the coolant temperature. The screen can be changed to other parameters
by pressing
MenuMenu
MenuMenu
Menu.