Barko Hydraulics 930 - Page 34

page 34page 34
page 34page 34
page 34
930/937 Mulcher (O)
800-00256
MURPHY POWER VIEW OPERATION CONTINUED...
SETTING UP THE DISPLAYSETTING UP THE DISPLAY
SETTING UP THE DISPLAYSETTING UP THE DISPLAY
SETTING UP THE DISPLAY
The screen may be configured to display a single engine parameter (1-up display), or four parameters at once
(4-up display). Default options are provided or you may customize the display by selecting the parameters
you want.
1-UP DISPLAY1-UP DISPLAY
1-UP DISPLAY1-UP DISPLAY
1-UP DISPLAY
Three options are available for modification of the 1-Up display.
Use Defaults Use Defaults
Use Defaults Use Defaults
Use Defaults – This option contains a set of engine parameters: Engine Hours, Engine RPM, System Voltage,
Battery Voltage, % Engine Load at Current RPM, Coolant Temperature, and Oil Pressure.
Custom Setup Custom Setup
Custom Setup Custom Setup
Custom Setup – This option allows for the modification of which parameter, the number of parameters, and the
order in which the parameters are being displayed.
Automatic Scan Automatic Scan
Automatic Scan Automatic Scan
Automatic Scan – Selecting the scan function will cause the 1-Up Display to scroll through the selected set of
parameters one at a time, momentarily pausing at each.
1-UP DISPLAY SETTINGS1-UP DISPLAY SETTINGS
1-UP DISPLAY SETTINGS1-UP DISPLAY SETTINGS
1-UP DISPLAY SETTINGS
1. Touch
Menu Menu
Menu Menu
Menu and use the
Arrow Keys Arrow Keys
Arrow Keys Arrow Keys
Arrow Keys to highlight SETUP 1-UP DISPLAY, then press
EnterEnter
EnterEnter
Enter.
2. To select USE DEFAULTS, highlight the option and press
EnterEnter
EnterEnter
Enter. A message indicating “RESTORED TO
DEFAULTS” is displayed.
3. To select CUSTOM SETUP, highlight the option and press
EnterEnter
EnterEnter
Enter. A list of engine parameters is displayed.
4. To select a parameter, use the
Arrow Keys Arrow Keys
Arrow Keys Arrow Keys
Arrow Keys to scroll and highlight the parameter, then touch
EnterEnter
EnterEnter
Enter.
Selected parameters are indicated by a # symbol to the right of it and represent the order in which the
parameter will be displayed.
5. To deselect a selected parameter and remove it from the list of displayed parameters, highlight the parameter
and touch
EnterEnter
EnterEnter
Enter.
6. Continue to scroll and select additional parameters for the CUSTOM 1-UP DISPLAY. Touch
Menu Menu
Menu Menu
Menu at any time
to return to the CUSTOM SETUP menu.
7. Selecting the AUTOMATIC SCAN ON function will cause the 1-up display to scroll through the selected set of
parameters one at a time.
8. Once the USE DEFAULTS, CUSTOM SETUP and AUTOMATIC SCAN functions have been set, touch
MenuMenu
MenuMenu
Menu
once to return to the main menu, or twice to display the 1-up display screen.