EasyManua.ls Logo

Baroness LM331 - Appended Table

Baroness LM331
103 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Maintenance Item
Before Work
After Work
Every Week
Every 50 hrs.
Every 100 hrs.
Every 200 hrs.
Every 250 hrs.
Every 400 hrs.
Every 500 hrs.
Every 800 hrs.
Every 1500 hrs.
Every 3000 hrs.
every month
Every 6 months
Every year
Every 2 years
Every 4 years
When Required
Remarks
*3
Replace radiator
hoses and clamp
bands
                                   
*1.*2.
*3
Replace fuel hoses
and clamps
                                   
*2
Replace intake air line
(air cleaner hose)
                                   
 
Replace hydraulic
hoses (Moving part)
                                   
 
Replace hydraulic
hoses (Moving part)
relating to steering
                                   
 
Replace hydraulic
hoses (Fixed part)
                                   
  Adjust brakes                                    
  Replace brake shoe                                    
  Replace brake cables                                    
*4 Replace battery                                    
*1: Consult your local Baroness Dealer or local KUBOTA Dealer for this service.
The items above (*2 marked) are registered as emission related critical parts by KUBOTA in the
U.S. EPA nonroad emission regulation.
As the engine owner, you are responsible for the performance of the required maintenance on the
engine according to the above instruction.
Please see the Engine's Warranty Statement in detail.
*3: Refer to the Engine's Owner's Manual.
*4: Refer to the Battery's Owner's Manual.
The values for consumables are not guaranteed.
Be sure to replace hydraulic hoses for steering cylinder and hydraulic hoses for hydraulic motor of
wheel relating to steering every two years.
List of Adjusted Value
Fan belt 10 mm (0.39 in)
Belt slack
when belt pressed with 98 N (10 kgf)
at the middle point.
Mower stabilizer spring
#2, #3 140.0 mm (5.51 in) Total length of spring
#1 60.0 mm (2.36 in) Total length of spring
Hydraulic pump drive belt
30.0 - 35.0 mm (1.18 - 1.38
in)
Total length of spring
Piston pump 53.0 mm (2.09 in) Total length of spring (lever adjuster)
Appended Table
LM331
Appended Table
Page 8-9
List of Adjusted Value

Table of Contents

Other manuals for Baroness LM331

Related product manuals